SR20 Forum banner
1 - 2 of 2 Posts

·
Drinking The H Juice Now
Joined
·
4,216 Posts
Discussion Starter · #1 ·
Anyone have install and setup instructions for these? I bought a used set from Stratton and want to put them on this weekend.

Any help would be appreciated.


brian
 

·
Drinking The H Juice Now
Joined
·
4,216 Posts
Discussion Starter · #9 ·
spnx said:
I have these, and instructions were impossible to find.
They're very straightforward, but if you have the rears, you'll find you have to machine about 3mm off the inboard side of them or they won't fit into the strut tower.
Be sure you don't have the insides reversed, or you'll only be able to get positive camber (I did that on one by accident). It will make sense if you look at them before you put them on the car and think about what kind of adjustment you want.
PM me questions if you want.
James
nope, only the fronts as of right now. so there is not a specific side they belong on or any specific orientation?

also, they just merely replace the top half of the strut top hat?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top