SR20 Forum banner

1 - 20 of 29 Posts

·
VZR Conversion
Joined
·
1,898 Posts
Discussion Starter #1 (Edited)
ok so this isnt really like a traditional group buy but i contacted EDO Perofrmance who is an authorized distributor for CUSCO and he setup this page for us to purchase CUSCO bars the same ones that happynole had done 8 group buys before.

CLICK HERE TO PAY FOR YOUR BARS

i think this is a pretty good deal considering that we dont have to do a traditional group deal type thing!

So here is the link and hope this benefits everyone that wants one. Me included :)

Price is $144 + shipping

please order through the link above.
 

·
VZR Conversion
Joined
·
1,898 Posts
Discussion Starter #2 (Edited)
Hyoga click on the link and buy 2 :)

This is the dual tube Type ST brace bar with the adjustment in the center. Pictures below.




B13 with a top mount:



B13 with a highport motor:



B14 with a lowport motor:




One month only special ! The group buy date is set from 5/24/10 to 6/25/10

please put in your oders so they can arrive on time :) thanks!
 

·
LOW N SLOW
Joined
·
629 Posts
how much?
 

·
Weekend Warrior
Joined
·
4,491 Posts
how much?
^You need to click on the link in the first post to view the price.

Would this fit in an nx2000 chassis or is this only for classic ser?
^It will fit a NX,Sentra, and a 200sx. If you look at the pics real close, it's showing all the cars I mentioned.
 

·
VZR Conversion
Joined
·
1,898 Posts
Discussion Starter #9
bump still available! june 25 is the new cut off date!
 

·
VZR Conversion
Joined
·
1,898 Posts
Discussion Starter #11
no this will not fit a 95 g20

bump!!!!
 

·
slave to the grind
Joined
·
2,707 Posts
can i still get in the deal i havent seen this thread???!!!! i so want one was just talkin about gettin one tonight too....please please
 

·
Registered
Joined
·
14 Posts
good deal. i bought mine awhile back....but. not sure if ill get another after snapping them in half. dammit!
Don't know how you managed to do that, I have had one installed on a GTI-R for over 8 years and not one inkling of a problem.

The only way I could see these snapping is if the threads are stripped during assembly.
 

·
Registered
Joined
·
40 Posts
Installation

I have received the STB today, try to install it and found a litttle a problem.
power steering line on the way at passenger side.
I start a new thread in suspension and steering.
If you guys know how to work it out please share.

thanks
 
1 - 20 of 29 Posts
Top