SR20 Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
222 Posts
Discussion Starter #1
I was reading up on the last thread about a custom setup, and noticed that the person (sorry, forget who it was that started the thread)got the dynomax muffler that had the inlet offset of center. I was just looking under my car and noticed that my Stillen has the inlet dead center. So Im guessing a dynomax muffler with the inlet dead center would also work, am I correct?? It looked like having the inlet in the center would give the pipe a straighter line from the B-pipe to the muffler. So Im thinking about getting the 20"er and then finding a nice tip for it. Has anybody tried the 20" can since that thread???

jason
 

·
91 SE-R
Joined
·
228 Posts
<font face="Verdana, Arial" size="2">Originally posted by jayac:
...noticed that the person (sorry, forget who it was that started the thread)got the dynomax muffler that had the inlet offset of center. ... So Im guessing a dynomax muffler with the inlet dead center would also work, am I correct?? ... Has anybody tried the 20" can since that thread???

jason
</font>
Beleive I started the thread you referred to.
Original thread at:
http://laf.cioe.com/~benbobbo/NonCGI/Forum1/HTML/001129.html

Photos of exhaust at: http://community.webshots.com/scripts/editPhotos.fcgi?action=viewall&albumID=14388469[/UR L]

OR: [url="http://community.webshots.com/album/14388469wOBiOnaVLl"]http://community.webshots.com/album/14388469wOBiOnaVLl
if 1st doesn't work

On my car (91 SER) stock muffler had the offset design on the muffler. The aftermarket offset lines up great. The 20" can would definetly fit (see the photo links). I'm checking the forumn about 1 time per week, so e-mail if questions and time is critical.
Dan

[This message has been edited by AC7880 (edited 08-01-2001).]
 
1 - 2 of 2 Posts
Top