SR20 Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
1,165 Posts
Discussion Starter #1
this was made for a rwd, but the way it looks it might fit a FWD. very nice peice. excellent welds and very high quality. it was made by ctc motor sports in dallas texas. it has 1/2 flanges and is braced in 3 places. it is for an sr20 and is t3 flanged. completely stainless. tig welded.







44 mm tial wastegate- 270

manifold- 525

both -725
 

·
Registered
Joined
·
1,715 Posts
wow nice manifold would be nice to see if it would fit a fwd
 

·
Registered
Joined
·
1,165 Posts
Discussion Starter #4
i will split them up. i will have a fwd car in about 2 weeks. i will check fitment and let you guys know
 

·
Registered
Joined
·
1,165 Posts
Discussion Starter #5
price change- 450 for the manifold

250 for the waste gate. i will split them up!! that is dirt for an equal length manifold
 

·
Registered
Joined
·
1,165 Posts
Discussion Starter #7
i know it will bolt up. it depends on the size of turbo you plan on using. you might have hood issues if you are going with something very large
 

·
Registered
Joined
·
1,165 Posts
Discussion Starter #9
the wategate it about 1/2 inch below the valve cover when mounted it shoudnt hit. let me test fit it an a fwd car and i will let you know. i should have one in about 2 weeks
 

·
Registered
Joined
·
1,165 Posts
Discussion Starter #11
sorry guys i looked at it again and the waste gate sits very high. it would be an easy fix, just cut it and relocate it.
 

·
Registered
Joined
·
507 Posts
This won't fit a FWD, unless it is completely re-fabricated.
It won't clear the radiator or the hood.

Great for RWD, though.
 
1 - 14 of 14 Posts
Top