SR20 Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
230 Posts
Discussion Starter · #1 ·
I have searched and found all kinds of answers but still unclear as to where to get vacuum for BOV and BOOST gauge also Im running a GREDDY profec controller can someone help me out with a clear source.
 

·
SR20DE+T FTFW!!!
Joined
·
101 Posts
Here's what I did after running them the wrong way at the suggestions of some of the forum members and having a screwed up idle issue. Tee all your vacuum/boost lines for your gauges, boost controller and BOV to the vacuum line in between the intake manifold and the fuel pressure regulator. I can get ya a pic if you need it.
 

·
SR20DE+T FTFW!!!
Joined
·
101 Posts
Here ya go man, this is the way I've been running my boost controller, my boost gauge and my blow off valve and have had no problems with it since changing it to this routing.





 

·
SR20DE+T FTFW!!!
Joined
·
101 Posts
pics are great im guessin that it will work for highport as well.
As long as it has the same line going from the intake manifold to the fuel pressure regulator it should work.
 
1 - 7 of 7 Posts
Top