SR20 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
487 Posts
Discussion Starter #1
Does JWT grind their own cams or are they just designed by JWT and ground somewhere else?

------------------
92 NX2000
Intake/Headers/Exhaust/Cams/Flywheel
14.545 @ 95.54 mph

 

·
_______
Joined
·
2,170 Posts
Hi Mason


JWT uses real Nissan billets and grinds them themselves, in-house.

So, no, they don't *make* them as such from scratch, but they formulate the specs and then make them according to their specs.

James
 

·
Registered
Joined
·
487 Posts
Discussion Starter #3
<font face="Verdana, Arial" size="2">Originally posted by spnx:
Hi Mason


JWT uses real Nissan billets and grinds them themselves, in-house.

So, no, they don't *make* them as such from scratch, but they formulate the specs and then make them according to their specs.

James
</font>
That's what I thought. But this guy from IC is telling me otherwise.



------------------
92 NX2000
Intake/Headers/Exhaust/Cams/Flywheel
14.545 @ 95.54 mph

 

·
Jah Rastafari
Joined
·
7,677 Posts
JWT does not grind their own cams they come up with cam profiles with an expert cam guy and they send the cams billets out to a cam grinder to have the job done.
 
1 - 4 of 4 Posts
Top