SR20 Forum banner

1 - 4 of 4 Posts

·
Whut?That Ain't No Hondah
Joined
·
2,558 Posts
Discussion Starter #1
Ok, heres the run down.

We got a known good u12 BB motor. We're getting spark. We've got 40psi of fuel pressure in the fuel lines. The fuel lines are NOT swap'd, out of the fuel filter, into the fuel rail, out of the fpr into the fuel tank return line.

We're getting 12v at each fuel injector clip, off and on. However, we are getting no spray pattern (no spray at all ) out of the fuel injectors.

We've swap'd a known GOOD DE rail/injectors/fpr/etc.. up to our harness, and they don't spray either.

Any possible CLUES as to whats wrong??
 

·
Registered
Joined
·
307 Posts
The only thing I can think of, is that the computer is not sending the pulse signals to the injectors. O wait - you got 12v, that could only mean that the problem lies in the injectors. What else could there be besides the FUSES......?
 
1 - 4 of 4 Posts
Top