SR20 Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
273 Posts
Discussion Starter #1
this "FPC" crap
..flat printed circuit connector..



I need to isolate the fuel/water/and tach from the meter control unit. any idea how I can go about doing this?
 

·
merely a flesh wound
Joined
·
15,274 Posts
What exactly are you trying to do?

C
 

·
merely a flesh wound
Joined
·
15,274 Posts
OK, I've never worked with a digi cluster before.

C
 

·
Registered
Joined
·
273 Posts
Discussion Starter #5
the fpc crap is on the g20 gauge cluster. Im trying to seperate fuel/tach/watertemp so I can easily attach it to the NX
 

·
Wiggle wagon driver...
Joined
·
1,445 Posts
could you not just make an adapter plug to the new cluster, or cut and splice the wires to make it work? i do not know too much about the different clusters, it's just a thought.
 

·
Registered
Joined
·
273 Posts
Discussion Starter #7
then you have to re-pin connectors. I dont think it would work anyway. Most people who have done that, did it- just in case they wanted to switch back to the regular cluster, im going the "point of no return" way, and just trying to make it work, even if it means I can't switch back.
 
1 - 7 of 7 Posts
Top