SR20 Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
329 Posts
Discussion Starter · #1 ·
Ok so my car was stalling intermittently off throttle, sometimes with the brakes applied. I cleaned out my IAC/AAC valve with seafoam and it worked really well. So the car doesn't stall anymore but the idle was high, like 1k-1200 rpm. I tried adjusting the idle screw when it was in timing mode but the thing still idles around 1K even with the idle screw all the way in, anyone experience this?
 

·
Registered
Joined
·
329 Posts
Discussion Starter · #3 ·
Super, I hope this is the case
 

·
Registered
Joined
·
470 Posts
yea the same thing happend to me when I cleaned the TB, went back to normal after a week i think.
 

·
Registered
Joined
·
329 Posts
Discussion Starter · #6 ·
Hey Stabone what's the word on the swap?
 

·
Registered
Joined
·
470 Posts
Cliffgump said:
Hey Stabone what's the word on the swap?
The swap is a go, although I just got in a accident :( I sent ya a PM this morning..

-T
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top