SR20 Forum banner

KYB AGX's

427 views 4 replies 4 participants last post by  SucKit 
Did you do the duct tape method or just put the washers that GC sent you between the collar and the strut? If you did do the duct tape method and are still getting clunking, make sure that the top nut on the rear strut is nice and tight...which means it is squishing the sandwich of metal/rubber washers/gc top hat together tightly. If you did not do the duct tape method...there is nothing you can do about the clunking! Also, make sure you have a rubber washer between any two metal objects to prevent them rubbing and clunking.

-saaby

[This message has been edited by Saaby (edited 09-28-2001).]
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top