SR20 Forum banner

List your mods!

6K views 112 replies 58 participants last post by  spnx 
#1 ·
Since we don't have the signature feature in this freeware version of the Ultimate Bulletin Board, we don't get to see what each other has in terms of mods. So post and list them in as gritty detail as you want!

1998 Sentra SE
exterior color: dark gray
options: sunroof, cruise, power windows/locks, remote keyless entry, CD/tape/AM/FM radio
mileage: 38k
mods: SMC shifter, KYB AGX struts, Eibach Pro Kit springs, open airbox w/K&N drop in, Redline MT90, Mobil 1 5W30 and oil filter, Toyo Proxies T1+ 205-50VR15, 17-18 degrees timing (somewhere in there), and 6G Civic floormats :)
future mods: 91 intake cam to put on at the ******* Rally in ~3 weeks. BB DET turbo parts including manifold, T25, 370cc injectors, blow off valve, possibly front mounting the interheater
 
#2 ·
1992 NX2000

exterior colour: superblack

options: solid roof (no t-tops!), 5 speed, cruise, power windows, power locks, no ABS, Clifford Sabre II alarm, with anti-code grabbing and ignition disable

kilometres: 170,000 (just over 100,000 miles)

mods: Pacesetter Short Shifter, Momo Superergonomic shift knob, GABs, Eibach Pro-Kits, 15X7 +35 mm Volk TE37 wheels, 215-45-15 Toyo T1 Pluses, front strut tower bar, JWT POP intake, Stillen header, Autometer Oil Pressure gauge, Superplug Magnetic drainplug, Redline MTL, Castrol Syntec 5w50, Redline Water Wetter, Ford HD DOT 3 Brake Fluid

future mods: Who knows? For now, a full superblack urethane and clearcoat respray, complete sanding and refinishing, dent removal, exterior trim replacement, August 8/2000.
 
#5 ·
I'm being a bit redundant to previous posts, but what the hell:

-JWT ECU
-JWT Performance Motor Mounts
-JWT POP
-JWT Heavy Duty Pressure Plate
-JWT S3 Cams (who needs VTEC? not me...)
-Hotshot Header
-Custom Stainless 2 1/2" Pipe in CAT's place
-GReddy Stainless 2" Cat-Back
-Magnecore Wires

-Eibach Springs
-Tokico Struts
-Advanti Racing Power 16"x7" Wheels
-Toyo Proxes 205/45ZR16
-Nitto NT555 Drag Radials on 2 stock wheels

-no brakes! (wore 'em out!)
-no interior! (I'm putting it back in this wknd)
-weight = 2455lbs!

I'm thinking that this is the next phase:

-The Place Racing Cold Air Intake
-300zx TT injectors (370cc)
-100hp JWT Nitrous Setup
-strut braces
-roll cage (just kidding!, dont plan on rolling it)
-brakes

J
 
#6 ·
1996 200SX SE-R
super black
31,900 miles
options: everything minus ABS and CD

Mods:
'93 intake cam
JWT POP
HS header
Courtesy b-pipe w/ OE muffler
17 deg timing
Courtesy cut short shifter w/ MOMO F-16 knob
ST rear sway bar
Courtesy front and rear STBs
Magnicor 8.5 wires
ricey red vaccuum hoses and brakes :)
KYB AGX
Eiback Pro-Kit springs
Sony CDX 680 cd player w/ 10 disk changer
Boston A. RM7's in front
Boston A. CX6's in rear
Soundstream MC240 amp
Coustic XM-3e x-over
JL Audio 10w1 sub
and "no vtec" stickers :0
 
#8 ·
1998 Super Black Sentra SE

28,000 miles.

ICE.. :)
-Kenwood cd deck Excelon series w/4v pre amps..forgot the model #
-Rockford Fosgate 75x4 amp..forgot the model # also
-MB-quart speakers f/5.25 coaxles r/6.5 coaxles model#'s????

Interior
-Trunk net
-Vinila roma Stinky tree
-Little kid seat in the rear 8\ (I leave it in at the drag strip to scare people)

Mods
-BB DET motor
-Blitz boost controler
-HKS front mount intercooler
-Autometer phantom oil and boost guages ziped tied to the steering coulmn
-ST sway bars F/R
-96 LSD trans
-JWT ECU
-PS short shifter
-GAB adjustable struts F/R
-Cusco/Steelin camber plates
-Eiback springs
-ES motor mount inserts
-UR pulles (2 piece)
-Me with a grin

Had the JWT S-3 cam until I toasted the motor.

Mike Gosselin
 
#11 ·
1987 Hatchback Sentra XE w/ 91 se-r sr20de engine

Exterior color: Yellow Pearl

Options: None (it's a 87)

Engine Mods: sr20de swap (performed in 1994), hotshot headers (series 1), Custom Apexi exaust,MSD ingntion box with manual RPM controller.

Interior Mods: Custom dash with electronic tachs (oil pres, water temp., ect. ), Autometer Monster RPM tach, Greddy Turbo timer (to control the engine shut off system), se-r leather shift knob, Sony sound system, Sony 10 dish CD changer, Kenwood tweeters, Sony woofer.

Other Mods: full se-r suspention, Lowering springs (1 1/2 inches),16" OZ GTi-R factory rally rims.

Future Mods: The car has been in Barbados for 3 years now and is being turned into a rally car. It will need a rally spec rollcage, and i'm building a sr20de from the block up to hold over 250hp's (naturally Aspirated).
http://paradiseracing.homestead.com/home.html
 
#13 ·
1991 Sentra SE-R, Super Black
112,500 miles, no options except A/C

Eibach Pro Kit, GABs, ES bushings all over the place, ES motor mount inserts (front and rear), SMC short shifter, HS strut tower bar, ES shifter bushing, SMC BABK (11.75" rotors) Altima master cylinder, JWT POP filter, JWT ECU, Focal R3 16" wheels with 205/45/16 Nitto NT-450 tires.

Mods I'm doing and aren't on the car yet, but are sitting in my garage:

HKS GT30/37 turbo, HKS wastegate, Spearco intercooler, JWT fuel rail, 72 lb-hr injectors, Cobra MAF, Greddy Type S BOV, MSD 6a ignition, Greddy Profec-B boost controller.

I also have a tranny getting built up, welded, cryo-treated and a Quaife LSD getting installed into it.

After all this is done on my stock motor, we're swapping the motor out for one we're building currently:

300ZXTT forged pistons (8.5:1 comp.) , Crower rods, piston coolers, and some headwork. And we'll probably swain coat some of the internal pieces too.

And then once all of that is done I may be getting the Truechoice suspension and a roll cage. We'll have to see how everything else goes first. :)
 
G
#14 ·
91 Sentra SE-R, black, 5spd. AC Broke

Mods: Weapon R intake, ES Engine mounts all 4 corners, ES suspension flex kit (Full kit), KYB AGX shocks, eibach prokit springs, 200sx SE-R wheels and 195/50/16 BRIDGESTONE RE71 tires, Topspeed STB, thats it!

2000 Sentra SE, STOCK!
 
#15 ·
Jay Hassinger
1997 200sx SE-R Turbo
JWT S3 cams,
JWT ECU with H2O daughter board and 4bar fuel program,
JWT fuel rail,
Cobra MAF,
MSD 50lb injectors,
Holley "race" FPR,
NOS glycerin filled 1 5/8" fuel pressure gauge,
300zx TT Fuel pump,
76 trim .82 A/R T3/T4 ball bearing turbo with port/polished turbine housing,
ERL 3D 125psi water injection,
Fmax 24"x8"x4" intercooler manifold and piping,
thermal coating,
TiAl divorced wastgate,
3" turbo back exhaust with Xtec muffler,
HKS EVC EZ boost controller,
HKS RaceGate BOV,
MSD Digital 6 ignition,
MSD Blaster high vibration external coil,
Accel 8mm wires,
AutoMeter monster tach,
Autometer 35psi boost guage,
Autometer A/F guage,
94+ Integra A-Pillar guage pod,
Custom Aluminum dash panels,
V-Racing fiberglass race seats,
UR underdrive pullies,
Optima battery relocated to trunk,
Flexalite dual 12" 2800cfm fans,
manual fan over-ride switch,
ACT street/strip clutch,
filled trans case,
PS Short Shifter,
Nismo Big Brake upgrade,
Ground Control 325/250lb coilovers,
KYB AGX Struts,
ES Poly bushings,
HP Racing front Strut bar,
Matrix Rear strut bar,
Konig Mosoon 17x7,
Pirelli P7000 215/40/17 tires,
98 Sentra SE "GTR" Grill,
Custom Vinyl badges,
Nissan aftermarket center armrest,
Nis-Knack crystal JSpec headlights,
Jspec Clear corners,
PIAA Superwhites in Fogs and headlights,
State Police strobes in reverse lights,
Polished Compressor housing/valve cover/intake manifold/strut bars/fuel rail...

ONE BUSTED ASS BANK ACCOUNT
 
#18 ·
its kinda ironic that you both have those in your car. I know a girl (I am dead serious) she bought her car, got it cleaned all that crap, got pulled over one night and the cops found a crack pipe under her seat. nothing happend to her and they all thought it was funny, but you know golf tee, french fry, crack pipe. all about the same :)
 
G
#21 ·
Lets see...

Fmax manifold (swain coated) w/ 50 trim/ 82 exhaust housing BB t3/t4oe turbo (swain coated), Greddy BOV, and HKS external wastegate, HKS front mounted IC, 3" downpipe (swain coated), 3" exhaust w/ borla exhaust

Profect B w/ HKS turbo timer, EGT gauge and boost gauge

Probe forged 8.5:1 pistons (swain coated, new oil pump, fuel lines, sensors etc.

Port and polished head, 5 angle valve job, and port matched everything

MSD 50 lb injectors, cobra maf, 300zx fuel pump

SSR Integrals w/ 225/40/16 A520s

Eaibach springs, GAB struts and ST swaybars all around

ES poly stuff all over

And the SMC short throw shifter

Hmm... Misc. stereo stuff, dents, scratches, SE-R driver's seat, window tint, no antenae

It sure seemed like more when I bought it...

Tait
93 NX
 
G
#25 ·
1992 NX . super black

Options: automatic, T-tops

Current mods:
Homemade CAI
Hamemade motor mounts
KYB-AGXs
Pacesetter header
2 1/4in. catback exhaust

Future mods: uh, all the stuff sitting in my closet: T3 turbo,turbo parts, broken manual tranny,
 
G
#26 ·
I have a '91 NX2000 "Egg" or "L'il Zipper"

Color: White (like an eggshell)

Mods:
PIAA 1400 Fog Lights (no original when bought)
K&N Dropin
Tokico Struts-Don't go to ASD in Santa Rosa, Ca for install. Bastards destroyed ABS sensor lines.
Dunlop SP Sport 8000 195/55ZR14
SABELT seat belt pads (chicks dig 'em)
PANASONIC DEH-31 CD Player (no radio when bought)

Future: Eibach Pro-Kit and Timing Advance on 8/9/00, After that not much because no money. You guys know the story on that.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top