SR20 Forum banner

1 - 9 of 9 Posts

·
www.motorists.org
Joined
·
3,047 Posts
Discussion Starter · #1 ·
I gave the aftermarket radio to the original owner and now I've got the stock radio in. But I cannot connect the antenna because the plug in the car is a single male prong and the radio has double female holes for the diversity antenna thing. Eric gave me something he thought would work but it doesn't. Anyone have a single prong female to double prong male adapter for the antenna to plug into my stock radio?

------------------
Ben98SentraSE
98 Sentra SE and crashed 93 NX2000
 

·
Off-Topic lurker..
Joined
·
3,122 Posts
dude, Best Buy will sell you one for like 8.99


------------------
Aztec Red 1993 NX2000
 

·
pwnd
Joined
·
3,455 Posts
Either that or ill sell you a decent JVC tape deck with changer controlls
. And a small amp and bass shakers if you would like
. I need to get rid of some of this crap
 

·
www.motorists.org
Joined
·
3,047 Posts
Discussion Starter · #4 ·
<font face="Verdana, Arial" size="2">Originally posted by silversx:
dude, Best Buy will sell you one for like 8.99


</font>
Oh, aight then
hehe
 

·
Not on fire... yet
Joined
·
591 Posts
Just follow the 2 prong wire down till you find the "block" then pull the single prong connector out of the block, it will fit into the radio. The only down fall is you lose the integrated antenna in the readr window (look at the top of your rear derforster lines and you will see it)
 

·
SR20DE Driver
Joined
·
151 Posts
Actually what you see on there now is probably an adapter to go from the diversity to the standard single pin. I would look down the line just a bit to see if it is not before you buy one.
 
1 - 9 of 9 Posts
Top