SR20 Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
4,465 Posts
Discussion Starter · #1 ·
Where do I shave off some material on the NX calips so the stock "classic" 14s will fit?

Pics would be wonderful!!!!!
or maybe I've overlooked a link with pics.
 

·
newbie
Joined
·
8,148 Posts

·
Registered
Joined
·
122 Posts
SmoothDaddyFig wondered
Where do I shave off some material on the NX calips so the stock "classic" 14s will fit?
You'll need about 1.5mm off the outside of the caliper - where it would otherwise rub against the inside of the 'spokes' of the wheel.
 

·
pwnd
Joined
·
3,455 Posts
I dont have any pics of the calps themselves, but give me a few mins and Ill scan in a pic of the fsm diagrams and then highlight the area that needs to be removed.
 

·
pwnd
Joined
·
3,455 Posts
Here ya go. Gota grind in the area that is black. i ground mine about flat. Lots of metal there so dont worry too much. take about 1.5 to 2mm off....now if i could picture 2mm i would get in the good.

Click here
 

·
Registered
Joined
·
4,465 Posts
Discussion Starter · #6 ·
aahh, perfect!!!!
You guys are tha BOMB!! !!
 

·
merely a flesh wound
Joined
·
15,274 Posts
I'll have detailed pictures for you Saturday.

Chris
 
1 - 7 of 7 Posts
Top