SR20 Forum banner

1 - 5 of 5 Posts

·
Stuck on an island
Joined
·
1,284 Posts
Discussion Starter #1
ok i just got a ngk o2 sensor and my old one is a bosh but the color of the wires do not match the ngk one has 2 white and one black wire, and bosh has one black, one red and one white wire, i dont know what to wire to hook up were all i know is black gose to black, but dose it matter what white wire gose to witch black or red wire?

[This message has been edited by Nick (edited 07-20-2001).]
 
9

·
Guest
Joined
·
0 Posts
****! , i have no idea man!!!!!!
just hook it up and see what happens.
it cant hurt!!!!
see if it idles funny when you start it up.
good luck
 

·
Veritas
Joined
·
6,205 Posts
As long as the connector is the one designed for your car, there shouldn't be any problem with the O2 sensor. There's only 3 types of O2 sensors: 1-wire, 2-wire, and yes, 3-wire.
As long as the NGK is made for your car (with the right connector), it should work just fine.
I hope
 

·
Stuck on an island
Joined
·
1,284 Posts
Discussion Starter #4
well i wired it up, the two white wires to teh red and the black, and it seems to be working.
 
1 - 5 of 5 Posts
Top