SR20 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
105 Posts
Discussion Starter #1
Okay, so I'm an idiot. I hope this is a small problem. Anyway, I'm installing a 91 intake cam and everything is going fine. However, I took the cam sprocket off without blocking to tensioner or removing it. Now, I can't get the sprocket back on the cam. Everything is lined up right, I just don't have enough slack to get the sprocket back on the cam. What do I need to do?
 

·
Registered
Joined
·
105 Posts
Discussion Starter #2
The sprocket almost fits on, i just can't get it onto the notch on the crankshaft...
 

·
Registered
Joined
·
105 Posts
Discussion Starter #3
Okay, I fixed the tensioner, but now the cam sprocket and camshaft don't seem to align properly. arrgh
 
1 - 3 of 3 Posts
Top