SR20 Forum banner

Need Info On The Apexi S-ITC

706 views 8 replies 4 participants last post by  Raverjames21 
#1 ·
I recently purchased an ITC after months and months of waiting. I have no manual for it and down know how to set the selectors on the back. Any useful knowledge on the Apexi s-itc would be appreciated.

James
 
#6 ·
Crim said:
i posted up about a month ago about these and never recieved a reply? Does anyone run them on our cars? Those english manuals don't seem to show an application for us Sr20DE/T guys. Who's actaully using one and can you post up what was required in the install?
I have one and will be installing it this weekend if I can get the information I need. I know what wires need connected to what but dont know the proper selector setteings on the back.

Wires are:
White ITC wire = crank angle out from ITC to ECU
Yellow ITC wire = cam angle out from ITC to ECU
Green ITC wire = cam angle in from cam sensor to ITC
Pink ITC wire = crank angle in from crank sensor to ITC
Black ITC wire = ITC ground (must use ECU ground)
Red ITC wire = main power to ITC (+)
All other wires not used.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top