SR20 Forum banner

1 - 20 of 51 Posts

·
Registered
Joined
·
421 Posts
Discussion Starter #1 (Edited)
Well, since nobody has been able to come through with purchasing my car, I'm considering parting it out. I would rather not have to undo all the stuff that was done to it, but I may have no other options. I'm going to post the mods, so if there is enough interest on the parts, then I may end up parting it. Again, nothing is for sale as of yet until there is enough interest to make it worth my while to part it out. Please post the parts you are interested in here so that we can all keep track of who wants what...

'97 Platinum Gold SE-R

T3/T4 .63 A/R
Fmax log manifold - SOLD
Fmax IC piping (upper pipes chrome-plated)
Fmax 2.5" DP - SOLD
Tial 35mm W/G (.45 bar, anodized red)
3" test pipe
3" custom exhaust w/ Magnaflow muffler
Spearco FMIC
Cobra Mass Airflow Sensor
JWT fuel rail (polished)
JWT S2 cams
JWT turbo ecu
MSD 50# injectors
Bored out T/B
MSD wires
NGK plugs

Stillen/Erebuni GTR front bumper cover
Fiber Images hood
Sparco stainless hood pins
Crystal Clear H4 Headlights
Clear corners
Mesh front grill

AD22VF brakes upgrade (red)
Drilled rotors
Axxis Ultimates pads (have spare set unused also)
Stainless lines
Ate Super Blue racing fluid
Altima master cylinder

Ground Control coilovers (350/300) - SOLD
Motivational shortened Konis up front - SOLD
Cusco camber plates (front-anodized blue) - SOLD
Polyurethane bushings for control arms (not installed yet)
Koni polycell bumpstops all around -SOLD
GAB rear shocks - SOLD
Motivational upper rear mounts (not installed yet)
F&R Stillen upper stut bars
S/T swaybars - SOLD

Custom bezel around radio that holds 3 gauges
Piller pod for other 3 gauges
B13 heated seats

This really sucks that it might have to come to this, but I really want to get my new project started. Ideally, I would like to sell the turbo components as a package, the suspension as a package, and then everything else could be individually purchased. Thanks
 

·
Registered
Joined
·
722 Posts
Ok, How much do you want for the gauges: boost, egt, oil press and h20 temp? How much for the exhaust and spearco i/c? Will the t3/t4 fits bb and gti-r manifold? How much? Send me some pics at [email protected]
 

·
Air filter cleaner masta
Joined
·
4,218 Posts
I am interested in the Sway bars. Please let me know by PM how much you want shipped. Also I am interested in the cusco camber plates. Let me know how much for both shipped, thanks!
 

·
95NismoB14grl
Joined
·
1,492 Posts
I'd be interested in the headlights!!
 

·
Recovering Rice Boy
Joined
·
1,176 Posts
Parts

Let me know how much you would want for the Fiber Images Hood with hood pins and the H4 headlights. Shipping would be to 94533.

Irwin
 

·
91 SER Richmond, VA
Joined
·
888 Posts
Id want the brakes, depending on the price.

-Mike
 

·
From Miami to New York
Joined
·
1,999 Posts
Interested if you part out:

Turbo
Manifold
Wastegate
 

·
Registered
Joined
·
207 Posts
If you still have the piller pod i would like that. What color is it??
 

·
Registered
Joined
·
421 Posts
Discussion Starter #14
Wow, only been about 12 hours and the big things I wanted to sell have interest. I'm going to sit down and put together pricing for everything above. Shipping costs will be the responsibility of the buyer. Certain things, like the hood and front bumper, may have to be sold locally because of cost andsize of shipping, but we'll see. Again, keep the inquiries coming and I'll have some pricing up very soon. Thanks
 

·
HATER
Joined
·
563 Posts
hows about the spair set of brake pads, the ss brake lines and the chamber plates,

and in anycase how far from c-bus ohio are you?

pm me

ahh hell give me a price for the bump stops to
 

·
Registered
Joined
·
421 Posts
Discussion Starter #17
I am doing some research to see what all of this is worth and am getting a price list together for everything. Other things that may be up for sale are also:

Clutchnet 6-puck, sprung hub clutch with their HD PP used for about 5k miles.
ACT street/strip clutch and PP, brand new
Zex chromoly flywheel, brand new
B&M short throw shifter
Stillen 4-1 header
Stillen rear adjustable swaybar

Things I may need are a stock exhaust manifold, a passenger side airbag (dark grey dash), stock front bumper cover and rear spoiler (if it's platinum gold that's a bonus). I'm located just outside of Chicago (about 35 mins west) so anyone willing to pick up parts is welcome. Thanks
 

·
Air filter cleaner masta
Joined
·
4,218 Posts
I have a stock exhaust manifold. Please PM me with your prices on the parts I listed above. Also I am interested in the B&M Shifter. Thanks
 

·
Registered
Joined
·
349 Posts
hey808 said:
Well, since nobody has been able to come through with purchasing my car, I'm considering parting it out. I would rather not have to undo all the stuff that was done to it, but I may have no other options. I'm going to post the mods, so if there is enough interest on the parts, then I may end up parting it. Again, nothing is for sale as of yet until there is enough interest to make it worth my while to part it out. Please post the parts you are interested in here so that we can all keep track of who wants what...

'97 Platinum Gold SE-R

T3/T4 .63 A/R
Fmax log manifold (thermotec-wrapped)
Fmax IC piping (upper pipes chrome-plated)
Fmax 2.5" DP
Tial 35mm W/G (.45 bar, anodized red)
3" test pipe
3" custom exhaust w/ Magnaflow muffler
Spearco FMIC
Cobra Mass Airflow Sensor
JWT fuel rail (polished)
JWT S2 cams
JWT turbo ecu
MSD 50# injectors
Bored out T/B
MSD wires
NGK plugs

Stillen/Erebuni GTR front bumper cover
Fiber Images hood
Sparco stainless hood pins
Crystal Clear H4 Headlights
Clear corners
Mesh front grill

AD22VF brakes upgrade (red)
Drilled rotors
Axxis Ultimates pads (have spare set unused also)
Stainless lines
Ate Super Blue racing fluid
Altima master cylinder

Ground Control coilovers (350/300)
Motivational shortened Konis up front
Cusco camber plates (front-anodized blue)
Polyurethane bushings for control arms (not installed yet)
Koni polycell bumpstops all around
GAB rear shocks
Motivational upper rear mounts (not installed yet)
F&R Stillen upper stut bars
S/T swaybars


Autometer Phantom gauges (boost, A/F, EGT, oil pres, H20 temp, volt)
Custom bezel around radio that holds 3 gauges
Piller pod for other 3 gauges
B13 heated seats

This really sucks that it might have to come to this, but I really want to get my new project started. Ideally, I would like to sell the turbo components as a package, the suspension as a package, and then everything else could be individually purchased. Thanks
I CANT BELIEVE THE CAR ISNT SOLD. THAT THING SOUNDS PRETTY SICK. MY DEEPEST SYMPATHY.
 
1 - 20 of 51 Posts
Top