SR20 Forum banner

Question about Lovefab Manifold!!

1586 Views 10 Replies 5 Participants Last post by  Master_Sentra
Hey guys,

I just received my lovefab topmount manifold that I'm planning to install on my DET with a GT3582R turbo, the thing is that when I compared the manifold's flange hole with the turbo gasket, the manifold hole is smaller.

Do you think this can be an issue or a simple porting of the flange can solve it??...

Thanks in advance for your help.

See less See more
1 - 1 of 11 Posts
The flange was a hybrid to fit VE and DE heads and the company that cut the flanges messed on a couple holes where there were a touch bigger. It has NO effect on the rest of it. The flange center hole though should match pretty close tot he turbo. You will be just fine on that stuff though. I think Cody should switch to a different T3 flange witha larger inner hole, but I have seen them come from ATP and many other places like that.

1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.