SR20 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
361 Posts
Discussion Starter · #1 ·
is there any way to remove the springs from my B13, and still have the car be able to roll (be pushed and steered). The car is a shell with no motor and the interior completely stripped. The chasis is sitting on 15x7 rims with 205-50-15's. The car does not need to rool far just in and out of the drive way and to the curb. TIA
 

·
Still not my president
Joined
·
5,173 Posts
put a piece of steel tubing to hold it up on the strut...that may work but i wouldnt suggest driving it at all like that
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top