SR20 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hi all I'm new to the forum
I have a problem trying to wiring my sr20 de engine up to the ECU I need help knowing which wiring I need to run my buggy on a switch panel any help or if someone knows where I can get a plug and play loom many thx Pete
 

·
Registered
Joined
·
118 Posts
theres a few guys out there make specialist looms, but there $$$$. easier to use a loom the motor came with, if you have too.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
theres a few guys out there make specialist looms, but there $$$$. easier to use a loom the motor came with, if you have too.
Thx I have a loom that come with engine but unfortunately the fella who removed the engine cut plugs off . Trying to find a basic pin out to get the engine to fire ? Also been thinking of going bike carbs and do away with ECU any help on this would be great if u can help many thx
 

·
Registered
Joined
·
118 Posts
almera (roller rocker ) de ecu's pin out are different to all other countries ecu's. otherwise there are plenty of pinouts on the net.good luck!
 
1 - 4 of 4 Posts
Top