SR20 Forum banner

Sr20det won’t restart after stall.

810 Views 2 Replies 2 Participants Last post by  SilviaWannabe
My sr has been having problems starting for a while and I’ve recently got it mostly sorted out. It will start fine normally, hot and cold. But if the car stalls from letting the rpms fall occasionally or just messing up getting moving it will not restart unless I pop the clutch. Originally it was from running to rich due to the z32 maf not being tuned into the car. It has been tuned since but it still isn’t starting if stalled. If anyone has any ideas what it could be any help would be greatly appreciated. I will attach a mod list below.

Attachments

See less See more
1 - 3 of 3 Posts
Are you turning the ignition switch all the way off before trying to restart?
Are you turning the ignition switch all the way off before trying to restart?
Yes, acts like it floods on stall. Took timing from 15 to 10 degrees seems to have resolved the issue.
  • Like
Reactions: 1
1 - 3 of 3 Posts
Top