[Guest]

Ill be running the 1/8 at San Diego's Qualcomm legal runs. Ive got a 2000 SE with PR CAI, Hotshot G3 header, custom exhaust, and stock 16's with 205/50 Falken Zieks. It'll be my first time at the track so any tips would be appreciated. TIA

 

[Mike]

Slip the clutch out while holding the throttle at 3k. Start slipping when the last yellow light is lite. Buy the time you get moving it will be green. Once your moving let the clutch all the way out then go like hell.

Mike

 

[97 Black SER]

There are a bunch of drag racing tips on SE-R.net.

------------------
Ryan 97 Black SER
advanced timing and custom 2.5" catback exhaust with dynomax super turbo muffler

 

[Guest]

THanks, btw. with the mods i have, whats a good time to shoot for in the 1/8?

 

[Guest]

very disappointing runs for my first time.
My best run was a 10.3, i let my cuzn drive my car and he gets a 10.008 with a bogged launch. WTF. I had better reaction/60ft times and could do no better! What could i be doing wrong?

 

[Jason92Classic]

Well, you need the ECU... BAD! Second, throw some slicks or drag radials on. THEN you'll see some shiz-nit!

------------------
Jason N. -- '92 Black Classic
JWT ECU
JWT Cams
JWT POP Adapted to:
PRI CAI
HS Header
2 1/2" Pipe in CAT's Place
GReddy Cat Back

 

[97 Black SER]

They don't make an ECU for his car yet.

------------------
Ryan 97 Black SER
advanced timing,custom 2.5" catback exhaust with dynomax super turbo muffler, Unorthodox Racing Pulleys, ES shifter Bushing, Hotshot Header(not installed), Hotshot CAI (waiting for patiently)

 

[Mike]

For refrence I was getting 9.7-9.8 1/8ths and netting low 15'[email protected] in the 1/4. At the time I had full bolt ons minus cams,lsd trans and ECU. My 60' were in the 2.3-2.4 range. What were you getting for 60's?

Now with the turbo the one slip I have here shows [email protected] for the 1/8 and [email protected] for the 1/4.

Mike

 

[Guest]

Thanks for all the responses guys.

here are results from 2 passes
Run #1 (me driving)
rt : .845
60ft: 2.436
mph : 69.34
ET :10.368

Run #2 (me still driving)
rt : .653
60ft: 2.459
mph : 69.02
ET : 10.477

Run #3 (my cuzn driving)
rt : .690
60ft: 2.486
mph : 71.08
ET : 10.084

well that was my 1st time at the track...

 

[Guest]

any insight as to what i could ne doing wrong?

 

[slowSER]

<font face="Verdana, Arial" size="2">Originally posted by DarKsiDe_SE:
any insight as to what i could ne doing wrong?</font>

The launch! You should be getting at least 2.2X. See the other drag racing thread here (which should be near the top now

) or the drag racing tips on SE-R.net.

------------------
'93 Sentra SE-R, daily driver and track/autox toy