SR20 Forum banner

Status
Not open for further replies.
1 - 12 of 12 Posts

·
Like it or Don't Like it
Joined
·
1,084 Posts
VE mods: 2.5 exh, DE pacesetter header, PR cai, jwt ve ecu.



------------------------------------------------------------





accord mods:

JDM H22a engine
2.5 Exh
3" Air Intake
DC Header
P13 ECU w/ Spoon program 8,500k rev cut.
Euro R Intake Manifold
Manual engine Cams
Retainers
MSD Coil


thats all I know of.

anyways cars are dead even the h22 might have a little more top end do to displacment but I don't know cus on the 2nd run both lanes where very new and on the 1st my lane was messed up n kinda full of bumps when i was hitting 4th gear but still on the 2nd run he started a little early but I pulled back on 3rd gear.

his car he says pushed 179whp and 154-156tq dont remember the tq exactly their around there.

well no more talking here are the vids enjoy.

Moderator deleted

did some web research and found out the accord weights less than 3,000lbs vs the prelude's 3000 anyways their close to the same weight.



Edrick
 

·
Registered
Joined
·
2,035 Posts
Those two cars look pretty evenly matched.
 

·
SR20VE or a T28? I dunno!
Joined
·
1,664 Posts
That's a clean Accord...
 

·
Professor Dingbat
Joined
·
5,543 Posts
yeah, he's clutching but not lifting off the gas, you can hear it hit the rev limit for a sec :eek: thats not going to be good for anyhting :(
 

·
Premium Member
Joined
·
9,405 Posts
Street racing is dumb. Take it to the track.
 
1 - 12 of 12 Posts
Status
Not open for further replies.
Top