SR20 Forum banner
1 - 8 of 8 Posts

·
newbie
Joined
·
8,148 Posts
Discussion Starter · #1 ·
<font face="Verdana, Arial" size="2">Originally posted by NismoNx2000:
I wanted to know what muffler you guys use and what kind of gains u received from it, and which brand and type do u guys feel is the best for the nx2000. Im planning on using 2.25" pipe into a muffler that will reap decent hp gains as well as have a nice tone that isnt too loud and one that most definlately does not have a ricey sound...if you guys can help, i would appreciate it..thanks.

</font>
Dynomax Ultraflow. I will go outside and take pictures tomorrow. A friend of mine works at a muffler shop so I had him do it for me. It looks like a pre-fab job the way he did it. This guy is in Brooklyn if you want to travel out here.
http://www.angelfire.com/ny/ianjiggyroom/IansNX2000page.html
or look on page 263 of Superstreet
 

·
Registered
Joined
·
1,055 Posts
I wanted to know what muffler you guys use and what kind of gains u received from it, and which brand and type do u guys feel is the best for the nx2000. Im planning on using 2.25" pipe into a muffler that will reap decent hp gains as well as have a nice tone that isnt too loud and one that most definlately does not have a ricey sound...if you guys can help, i would appreciate it..thanks.

------------------
1992 Nissan NX2000
White...fully loaded
Stock (for now)
 

·
Registered
Joined
·
1,055 Posts
thanks a lot for the input, that post you did had some really good info, and i think im gonna try and duplicate your setup, because i too want to keep it stock looking and keep my torque and loosen up the high end a bit. thanks again...

------------------
1992 Nissan NX2000
White...fully loaded
Stock (for now)
 

·
newbie
Joined
·
8,148 Posts
Discussion Starter · #5 ·
<font face="Verdana, Arial" size="2">Originally posted by NismoNx2000:
I wanted to know what muffler you guys use and what kind of gains u received from it, and which brand and type do u guys feel is the best for the nx2000. Im planning on using 2.25" pipe into a muffler that will reap decent hp gains as well as have a nice tone that isnt too loud and one that most definlately does not have a ricey sound...if you guys can help, i would appreciate it..thanks.

</font>
Here are the pics and descriptions of the exhaust on the back of my NX2000.
http://www.angelfire.com/ny/ianjiggyroom/images/Dynomax1.JPG
http://www.angelfire.com/ny/ianjiggyroom/images/Rear.JPG


This is the Greddy I had on the NX2000.
http://www.angelfire.com/ny/ianjiggyroom/images/Greddy1.JPG
I left out the fact that the tip was too long and had to be cut as well.
 

·
newbie
Joined
·
8,148 Posts
Discussion Starter · #6 ·
<font face="Verdana, Arial" size="2">Originally posted by Pretty White:
Here are the pics and descriptions of the exhaust on the back of my NX2000.
http://www.angelfire.com/ny/ianjiggyroom/images/Dynomax1.JPG
http://www.angelfire.com/ny/ianjiggyroom/images/Rear.JPG


This is the Greddy I had on the NX2000.
http://www.angelfire.com/ny/ianjiggyroom/images/Greddy1.JPG
I left out the fact that the tip was too long and had to be cut as well.

</font>
Helllo, anyone listening out there? Why am I providing this info if no one is paying attention?
 

·
Registered
Joined
·
1,055 Posts
Prettywhite your pics arent showing up....
 

·
newbie
Joined
·
8,148 Posts
Discussion Starter · #8 ·
<font face="Verdana, Arial" size="2">Originally posted by NismoNx2000:
Prettywhite your pics arent showing up....</font>
You have to refresh the page or click the link in the go box once you get the Angelfire logo. I don't know why they don't show up.
 
1 - 8 of 8 Posts
Top