[Ben]

I want to get a set for my 14" steel wheels. They currently have 195/60?-14 Blizzaks on them and I don't know the width of the wheels, but I plan to temp remove 2 Blizzaks during the summer to run the slicks. I just need to know what width and what height I should get. I put about 200hp to the wheels right now with stock boost and when I get a boost controller I plan to run 10-12psi at the track so however much power that would be.

------------------
Ben98SentraSE
98 Sentra SE TURBO

 

[TurbochargedSER]

You can run the MT 20x8x14 slicks on either Classic SE-R wheels or 14" Wheels. Good Luck!

------------------
http://albums.photopoint.com/j/AlbumIndex?u=1497569&a=11327630


Louis Anaya 1992 Sentra SE-R
349.6 hp & 288.9 ft/lb @ 19 psi, 13.6 @ 111 mph(Street Tires),12.3 @ 115.6 mph(Slicks), Bluebird SR20DET w/ GTiR Pistons,T3/T04E,Deltagate Wastegate (7-9 PSI) FMAX Manifold, RevHard FMIC, JWT S3 Cams, JWT Ported & Polished Head, 1996 200SX SE-R Welded & Cyro Treated Tranny, ACT Xtreme P/PL & 6 Puck Disc, Cobra MAF, JWT ECU w/ 4 Bar Fuel Program, MSD 50lb/hr Injectors, JWT Fuel Rail, 300ZXTT Fuel Pump, AeroMotive Adjustable Fuel Pressure Regulator, Greddy Type "R" BOV, Greddy Profec B, Greddy Boost & EGT Guages, UR 4 Pulley Kit, Powerslot Rotors, Axxis MM Brake Pads, ES Motor Mounts, Topspeed Short Shifter, Momo Cobra Shift Knob, KYB AGX Struts, GC Coilovers (350F/600R)& 17x7 White Tenzo Shu-4's w/ Sumitomo 205/40/ZR17 Tires (Street), 13x7.5 White Lenso VPD's w/ Mickey Thompson 24x8x13 Slicks(Drag)